Antminer S9 13.5t 14t Asic Miner Machine Bitmain mining BTC 1323W with APW3 APW7

Asic Miner Bitmain Antminer S9 13.5T Bitcoin mining machine blochchain SHA256 With APW3 APW7

Specifications:

Brief introduction of Antminer S9

1. The Antminer S9 contains a total of 3 computing boards. Each board is powered by 3 PCI-e connectors.

2. Each computing board consumes about 360-460 watts, and the rated voltage is 12 volts and 34.3 amps.

3. The total power consumption of S9 is between 1078-1550 watts, which depends on computing power and ambient temperature.

4. The maximum power consumption at a temperature of 40°C is 1550 watts.

5. Using a standard power adapter to power this unit will result in a power consumption of approximately 1600 watts (533W per board).

The Antminer S9 adopts a dual-fan, triple-hashboard mining machine design, and the body is integrally formed. It uses a precision die-casting design and aluminum alloy materials to provide strong protection for the computing chip and enhance the overall heat dissipation efficiency of the body.

S9 is composed of three hashrate boards, each of which has three PCI-E6pin interfaces, and three data lines from the hashrate board to the control board.

From the front of the miner, you can see the configuration of the IP address feedback button, network cable interface, reset button and status indicator. The front fan of the miner can also be seen from the front, and the wind can be taken in from this side. From the back of the miner, you can see the cooling fan of the miner, and the miner emits wind from this side. S9 uses Bitmain's self-developed BM1387 chip, with 63 chips on each computing board, and each chip is equipped with an independent heat sink. The overall internal structure of the mining machine is very compact, and the interval of the cooling modules extends to bring a larger heat dissipation area. The interval also forms a unique air duct inside the mining machine, which can maximize the use of fans and structural cavity to maximize the heat dissipation effect.

Heat and noise

Using the Antminer PPLNS mode for mining, the test site is a conference room with an area of about 30 square meters, the room temperature is 28 degrees, and the heat and noise test is performed after the mining machine runs for 24 hours.

10cm away from the air outlet of the Antminer S9, the measured noise of the mining machine is 88dB, but the noise drops to 70 decibels 1 meter away. After closing the door, there was no obvious sound.

The official standard computing power of the Antminer S9-13.5T version is 13.5T. In the actual test, the actual average computing power is about 13.8TH/s, which is higher than the nominal value. The power of the Antminer S9-13.5T version in the actual test is 1366W, which is also higher than the nominal value, and the power consumption per T is about 99W.

Model Antminer S9 (13.5Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 13.5Th/s for a power consumption of 1323W.

DongXin Miner is a trading company focusing on quality and products. The company is mainly engaged in asic mining machines, graphics cards and accessories for mining. It has test points and warehouses in Shenzhen and Dongguan. There are more than 30,000 machines in stock, and an average of 300 machines are traded daily. It is the first-level agent of major brands of mining machines in the country: such as Antminer, Whatsminer, Innosilicon, Avalon, Ebit, etc., as well as the trusted partner of major miner farm owners across the country, selling new and second-hand mines The product range of the machine is complete, the price is reasonable, and the quality is strictly controlled. Each machine has been strictly tested and sorted to ensure that every customer is very satisfied with the product.

When you choose us, you have not only chosen quality, but also safety.